VOS3000 ASR ACD Analysis, VOS3000 Codec G729 Transcoding, VOS3000 IVR Balance Query, VOS3000 DTMF Modes, VOS3000 Gateway Analysis Reports
VOS3000 Gateway Analysis Reports provide comprehensive visibility into call performance across all gateway connections in your VoIP network. These reports enable operators to analyze connection success rates, identify failure patterns, monitor traffic distribution, and optimize routing decisions. The reporting system covers mapping gateways (origination), routing gateways (termination), area-based analysis, and cross-gateway performance metrics essential for wholesale VoIP operations.
Understanding gateway reports is crucial for maintaining service quality, as we discuss in our VOS3000 FAQ guide.
Gateway analysis reports are accessed through the VOS3000 management interface:
| Report Name | Description | Access Path |
|---|---|---|
| Mapping Gateway Analysis Report | Overall connection statistics for mapping gateways | Data Report > Analysis Report > Mapping Gateway Analysis |
| Mapping Gateway Area Analysis | Call analysis by destination area | Data Report > Analysis Report > Mapping Gateway Area |
| Mapping Gateway Performance | Concurrent call statistics by hour | CDR Analysis > Mapping Gateway Analysis > Performance |
| Mapping Gateway Call Analysis | Connection analysis details | CDR Analysis > Mapping Gateway Analysis > Call Analysis |
| Mapping Gateway Fail Analysis | Call failure reason breakdown | CDR Analysis > Mapping Gateway Analysis > Fail Analysis |
| Report Name | Description | Access Path |
|---|---|---|
| Routing Gateway Analysis Report | Overall connection statistics for routing gateways | Data Report > Analysis Report > Routing Gateway Analysis |
| Routing Gateway Area Analysis | Destination area breakdown | Data Report > Analysis Report > Routing Gateway Area |
| Routing Gateway Performance | Concurrent call statistics by hour | CDR Analysis > Routing Gateway Analysis > Performance |
| Routing Gateway Call Analysis | Connection analysis details | CDR Analysis > Routing Gateway Analysis > Call Analysis |
| Routing Gateway Fail Analysis | Failure reason percentage breakdown | CDR Analysis > Routing Gateway Analysis > Fail Analysis |
For configuring gateways before analysis, see our SIP trunking setup guide.
Each gateway analysis report contains the following key metrics:
| Metric | Description | Importance |
|---|---|---|
| Total Calls | Sum of connected and unconnected call attempts | Traffic volume indicator |
| Fail | Unconnected calls count | Quality issue indicator |
| Success | Calls with connect/busy/no answer/ringing signaling | Reachability indicator |
| Answered | Calls with connect signaling only | Actual conversation indicator |
| Average Call Duration | Mean duration of answered calls | Quality and fraud indicator |
| Total Call Time | Cumulative duration of all calls | Billing and capacity metric |
VOS3000 can automatically generate reports on a scheduled basis. Configure these in System Parameters:
| Parameter | Default | Description |
|---|---|---|
SERVER_REPORT_GATEWAY_CROSS_LOCATION_ASR_ACD | Off | Auto generate gateway cross area ASR ACD report |
SERVER_REPORT_GATEWAY_MAPPING_ASR_ACD | Off | Auto generate mapping gateway analysis report |
SERVER_REPORT_GATEWAY_ROUTING_ASR_ACD | Off | Auto generate routing gateway analysis report |
SERVER_REPORT_GATEWAY_MAPPING_LOCATION_ASR_ACD | On | Auto generate mapping gateway area analysis |
SERVER_REPORT_GATEWAY_ROUTING_LOCATION_ASR_ACD | On | Auto generate routing gateway area analysis |
Cross area analysis shows call flow between mapping gateways and routing gateways across different destination areas:
For understanding rate and area configuration, see our VOS3000 prefix settings guide.
๐ Need Help with VOS3000 Reporting?
Our experts can configure comprehensive reporting dashboards for your operation.
Call Distribution reports show traffic patterns over 24-hour periods:
Historical Performance shows concurrent call patterns on specified dates:
๐ก Note: Unsuccessful calls are not counted in historical performance charts, so actual concurrent calls may be slightly higher than displayed values.
The number of gateways displayed in performance charts is controlled by:
SERVER_DISPLAY_CHART_GATEWAY_SIZE โ Determines how many top gateways by concurrency are shownConfigure gateway alarms to receive alerts for performance issues:
| Alarm Type | Trigger Condition |
|---|---|
| Mapping ASR | ASR falls below threshold |
| Mapping ACD | ACD falls below threshold |
| Mapping Concurrency Decline | Sudden drop in concurrent calls |
| Mapping Gateway Concurrent Rise | Unusual increase in concurrent calls |
| Mapping Gateway Call Rate | Abnormal call rate changes |
| Mapping Bilateral Reconciliation Deviation | Billing discrepancy detected |
| Mapping Packet Loss Rate | High packet loss percentage |
For vendor reconciliation, see our guide on vendor billing CDR reports.
Fail analysis provides detailed breakdown of call termination reasons:
For specific error troubleshooting, see our NoAvailableRouter error guide.
Daily call analysis provides 15-minute sampling intervals throughout the day:
VOS3000 includes report management functions for data retention:
| Parameter | Default | Description |
|---|---|---|
SERVER_QUERY_CDR_MAX_DAY_INTERVAL | 31 | Maximum interval for CDR inquiry (days) |
SERVER_QUERY_MAX_ONE_PAGE_SIZE | 200000 | Maximum number of data per page |
SERVER_QUERY_MAX_SIZE | 30000000 | Data query limit (items) |
Q1: How often should I review gateway reports?
A: Daily review is recommended for high-traffic platforms. Weekly analysis is sufficient for smaller operations. Set up automatic report generation for consistent monitoring.
Q2: Whatโs the difference between Success and Answered?
A: โSuccessโ includes all calls that received any response (connect, busy, no answer, ringing). โAnsweredโ only counts calls that were actually connected.
Q3: How do I export gateway reports?
A: Most report pages include an Export button. Reports can be exported in CSV or Excel format for further analysis in spreadsheet applications.
Q4: What does low ACD indicate?
A: Low Average Call Duration may indicate route quality issues, wrong number calls, or potentially fraudulent traffic. Investigate patterns that deviate from normal.
Q5: Can I schedule automatic report delivery?
A: Yes, enable auto-generation in system parameters. Reports will be generated automatically and can be accessed in the Report Management section.
๐ Professional VOS3000 Analytics Setup
Custom reporting solutions and analytics dashboards for VoIP operators.
For professional VOS3000 call center configuration and deployment:
๐ฑ WhatsApp: +8801911119966
๐ Website: www.vos3000.com
๐ Blog: multahost.com/blog
๐ฅ Downloads: VOS3000 Downloads
Master the VOS3000 analysis report for comprehensive gateway performance monitoring. Learn ASR ACD analysis, gateway…
Master the VOS3000 clearing report for reliable financial settlement and reconciliation. Learn clearing report configuration,…
Master VOS3000 bill report for accurate revenue tracking across gateways, phone accounts, and destinations. Learn…
Master the VOS3000 report system for complete bill, cards, clearing, and analysis reports. Learn report…
Master VOS3000 authorization management for robust number section limitation. Learn authorization types, number section restrictions,…
Master the VOS3000 agent account system for strategic commission hierarchy setup. Learn agent account configuration,…