{"id":1201,"date":"2026-04-16T00:41:31","date_gmt":"2026-04-16T00:41:31","guid":{"rendered":"https:\/\/www.vos3000.com\/blog\/?p=1201"},"modified":"2026-04-16T00:41:40","modified_gmt":"2026-04-16T00:41:40","slug":"vos3000-caller-number-pool-traffic","status":"publish","type":"post","link":"https:\/\/www.vos3000.com\/blog\/vos3000-caller-number-pool-traffic\/","title":{"rendered":"VOS3000 Caller Number Pool: Powerful CLI Rotation for Outbound Traffic"},"content":{"rendered":"\n<h1 class=\"wp-block-heading\" id=\"vos-3000-caller-number-pool-powerful-cli-rotation-for-outbound-traffic\">VOS3000 Caller Number Pool: Powerful CLI Rotation for Outbound Traffic<\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">The <strong>VOS3000 caller number pool<\/strong> feature solves a critical problem that call centers and high-volume outbound operators face daily: carriers that rate-limit or block calls when too many originate from the same caller ID number. Without CLI rotation, an outbound call center using a single phone number for thousands of daily calls will inevitably trigger carrier anti-spam filters, resulting in blocked calls, reduced ASR (Answer Seizure Ratio), and lost revenue. VOS3000&#8217;s built-in caller number pool rotates the outbound caller ID across a pool of configured numbers, distributing calls evenly and preventing any single number from being flagged or rate-limited by the carrier.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">This guide covers the complete VOS3000 caller number pool configuration: from enabling the feature on routing gateways, to choosing between Random and Poll rotation modes, to configuring the FORWARD_SIGNAL_REWRITE_SEQUENCE parameter in softswitch.conf. Every feature described here is verified in the official VOS3000 V2.1.9.07 Manual Section 2.5.1.1 (Routing Gateway Additional Settings). For professional assistance with VOS3000 call center configurations, contact us on WhatsApp at <strong>+8801911119966<\/strong>.<\/p>\n\n\n\n<div class=\"wp-block-rank-math-toc-block\" id=\"rank-math-toc\"><h2>Table of Contents<\/h2><nav><ul><li><a href=\"#vos-3000-caller-number-pool-powerful-cli-rotation-for-outbound-traffic\">VOS3000 Caller Number Pool: Powerful CLI Rotation for Outbound Traffic<\/a><ul><li><a href=\"#vos-3000-caller-number-pool-why-cli-rotation-matters\">VOS3000 Caller Number Pool: Why CLI Rotation Matters<\/a><ul><li><a href=\"#the-carrier-rate-limiting-problem\">The Carrier Rate-Limiting Problem<\/a><\/li><\/ul><\/li><li><a href=\"#enabling-vos-3000-caller-number-pool-on-routing-gateway\">Enabling VOS3000 Caller Number Pool on Routing Gateway<\/a><ul><li><a href=\"#step-1-access-routing-gateway-additional-settings\">Step 1: Access Routing Gateway Additional Settings<\/a><\/li><li><a href=\"#step-2-configure-the-caller-number-pool\">Step 2: Configure the Caller Number Pool<\/a><\/li><\/ul><\/li><li><a href=\"#vos-3000-caller-number-pool-random-vs-poll-mode\">VOS3000 Caller Number Pool: Random vs Poll Mode<\/a><ul><li><a href=\"#random-mode-default\">Random Mode (Default)<\/a><\/li><li><a href=\"#poll-mode-sequential\">Poll Mode (Sequential)<\/a><\/li><\/ul><\/li><li><a href=\"#vos-3000-caller-number-pool-multiplexes-setting\">VOS3000 Caller Number Pool: Multiplexes Setting<\/a><ul><li><a href=\"#how-multiplexes-works\">How Multiplexes Works<\/a><\/li><\/ul><\/li><li><a href=\"#vos-3000-caller-number-pool-forward-signal-rewrite-sequence\">VOS3000 Caller Number Pool: FORWARD_SIGNAL_REWRITE_SEQUENCE<\/a><ul><li><a href=\"#configuring-softswitch-conf\">Configuring softswitch.conf<\/a><\/li><\/ul><\/li><li><a href=\"#vos-3000-caller-number-pool-interaction-with-number-transform\">VOS3000 Caller Number Pool: Interaction with Number Transform<\/a><ul><li><a href=\"#order-of-operations\">Order of Operations<\/a><\/li><\/ul><\/li><li><a href=\"#testing-vos-3000-caller-number-pool\">Testing VOS3000 Caller Number Pool<\/a><ul><li><a href=\"#testing-procedure\">Testing Procedure<\/a><\/li><\/ul><\/li><li><a href=\"#vos-3000-caller-number-pool-best-practices\">VOS3000 Caller Number Pool: Best Practices<\/a><ul><li><a href=\"#pool-size-recommendations\">Pool Size Recommendations<\/a><\/li><li><a href=\"#number-format-consistency\">Number Format Consistency<\/a><\/li><li><a href=\"#monitor-cdr-for-rotation-verification\">Monitor CDR for Rotation Verification<\/a><\/li><\/ul><\/li><li><a href=\"#related-resources\">Related Resources<\/a><\/li><li><a href=\"#frequently-asked-questions-about-vos-3000-caller-number-pool\">Frequently Asked Questions About VOS3000 Caller Number Pool<\/a><ul><li><a href=\"#what-is-the-vos-3000-caller-number-pool\">What is the VOS3000 caller number pool?<\/a><\/li><li><a href=\"#what-is-the-difference-between-random-and-poll-mode-in-vos-3000-caller-number-pool\">What is the difference between Random and Poll mode in VOS3000 caller number pool?<\/a><\/li><li><a href=\"#what-does-the-multiplexes-setting-do-in-the-caller-number-pool\">What does the Multiplexes setting do in the caller number pool?<\/a><\/li><li><a href=\"#how-do-i-test-if-the-vos-3000-caller-number-pool-is-working\">How do I test if the VOS3000 caller number pool is working?<\/a><\/li><li><a href=\"#can-i-use-different-caller-number-pools-for-different-routing-gateways\">Can I use different caller number pools for different routing gateways?<\/a><\/li><li><a href=\"#does-the-caller-number-pool-work-with-number-transform-rules\">Does the caller number pool work with Number Transform rules?<\/a><\/li><\/ul><\/li><li><a href=\"#get-professional-help-with-vos-3000-caller-number-pool\">Get Professional Help with VOS3000 Caller Number Pool<\/a><\/li><li><a href=\"#\ud83d\udcde-need-call-center-setup-support\">\ud83d\udcde Need Professional VOS3000 Setup Support?<\/a><\/li><\/ul><\/li><\/ul><\/nav><\/div>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"vos-3000-caller-number-pool-why-cli-rotation-matters\">VOS3000 Caller Number Pool: Why CLI Rotation Matters<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Before diving into configuration, understanding why CLI rotation is essential helps you design the right rotation strategy for your traffic patterns. The problem affects outbound call centers, wholesale operators, and any deployment making high-volume outbound calls through carrier trunks.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"the-carrier-rate-limiting-problem\">The Carrier Rate-Limiting Problem<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Most carriers implement per-number rate limiting as an anti-spam measure. When a single caller ID number generates an unusually high volume of calls within a short period, the carrier&#8217;s fraud detection system flags it as potential spam or robocalling behavior. The consequences range from reduced call completion rates (carriers silently reject excess calls) to complete blocking of the offending number. For a call center making 10,000 outbound calls per day from a single number, these limits are reached quickly, and the center&#8217;s ASR drops dramatically as the day progresses.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The VOS3000 caller number pool directly addresses this by distributing outbound calls across multiple caller ID numbers. With 50 numbers in the pool and 10,000 daily calls, each number averages only 200 calls per day, well below carrier rate-limiting thresholds. This simple distribution dramatically improves call completion rates and protects your outbound traffic from being flagged as spam.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">\ud83d\udcca Metric<\/th><th class=\"has-text-align-left\" data-align=\"left\">\ud83d\udd34 Single CLI<\/th><th class=\"has-text-align-left\" data-align=\"left\">\ud83d\udfe2 50-Number Pool<\/th><\/tr><tr><td>Calls per number per day (10K total)<\/td><td>10,000<\/td><td>200<\/td><\/tr><tr><td>Typical carrier per-number limit<\/td><td>~500-1000\/day<\/td><td>~500-1000\/day<\/td><\/tr><tr><td>Rate-limit triggered?<\/td><td>Yes, frequently<\/td><td>No<\/td><\/tr><tr><td>ASR (Answer Seizure Ratio)<\/td><td>30-40% (degraded)<\/td><td>50-60% (normal)<\/td><\/tr><tr><td>Number blocking risk<\/td><td>High<\/td><td>Minimal<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"enabling-vos-3000-caller-number-pool-on-routing-gateway\">Enabling VOS3000 Caller Number Pool on Routing Gateway<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The caller number pool is configured on a per-routing-gateway basis, meaning you can enable CLI rotation for specific carrier trunks while leaving others with static caller IDs. This flexibility allows you to apply rotation only where carriers require it.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"step-1-access-routing-gateway-additional-settings\">Step 1: Access Routing Gateway Additional Settings<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Navigate to <strong>Operation Management &gt; Gateway Operation &gt; Routing Gateway<\/strong>, select the gateway where you want to enable CLI rotation, and click Additional Settings. In the Others section (VOS3000 Manual Section 2.5.1.1, Page 50), you will find two caller number pool options:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Enable Caller Number Pool:<\/strong> When checked, VOS3000 rotates the caller ID number for outbound calls through this routing gateway using numbers from the configured pool<\/li>\n\n\n\n<li><strong>Enable Forwarding Signal Caller Pool:<\/strong> When checked, VOS3000 rotates the caller ID for forwarding signal scenarios, where the call is forwarded through another gateway and the original caller ID needs to be replaced with a number from the pool<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">For most outbound call center scenarios, &#8220;Enable Caller Number Pool&#8221; is the primary setting you need. &#8220;Enable Forwarding Signal Caller Pool&#8221; is used in more complex routing scenarios where calls are forwarded through intermediate gateways and the forwarding signal&#8217;s caller ID needs rotation independent of the original call&#8217;s caller ID.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"step-2-configure-the-caller-number-pool\">Step 2: Configure the Caller Number Pool<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">After enabling the caller number pool, you need to add the actual phone numbers to the pool. The caller number pool is configured in the routing gateway&#8217;s caller number settings, where you specify the list of phone numbers that VOS3000 will rotate through for outbound calls. Each number in the pool must be a valid phone number format that the carrier will accept in the From header or P-Asserted-Identity header of the SIP INVITE.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">\u2699\ufe0f Setting<\/th><th class=\"has-text-align-left\" data-align=\"left\">\ud83d\udcdd Description<\/th><th class=\"has-text-align-left\" data-align=\"left\">\u26a0\ufe0f Important Note<\/th><\/tr><tr><td>Enable Caller Number Pool<\/td><td>Activates CLI rotation for outbound calls<\/td><td>Only affects calls through this gateway<\/td><\/tr><tr><td>Enable Forwarding Signal Caller Pool<\/td><td>Activates CLI rotation for forwarding<\/td><td>For forwarded call scenarios only<\/td><\/tr><tr><td>Multiplexes<\/td><td>Max concurrent calls per pool number<\/td><td>0 = unlimited; set to limit per-number load<\/td><\/tr><tr><td>Rotation Mode<\/td><td>Random or Poll (sequential)<\/td><td>See detailed comparison below<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"vos-3000-caller-number-pool-random-vs-poll-mode\">VOS3000 Caller Number Pool: Random vs Poll Mode<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The VOS3000 caller number pool supports two rotation modes that determine how the next caller ID number is selected from the pool. Choosing the right mode depends on your traffic pattern and carrier requirements.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"random-mode-default\">Random Mode (Default)<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">In Random mode, VOS3000 selects a caller ID number from the pool randomly for each new call. This provides the most even distribution across all numbers in the pool, especially when dealing with variable call durations and bursty traffic patterns. Random mode is the best choice for most outbound call center deployments because it naturally distributes calls across all pool numbers without creating sequential patterns that carriers might detect.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The randomness also means that the same number will not be selected in a predictable sequence, which helps avoid carrier detection of rotation patterns. However, in truly random selection, a single number might occasionally be selected more frequently than others in a short period due to statistical variance. This is generally not a problem with pools of 20 or more numbers.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"poll-mode-sequential\">Poll Mode (Sequential)<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">In Poll mode, VOS3000 selects caller ID numbers from the pool in sequential order, cycling back to the first number after the last one is used. This provides a perfectly even distribution where each number in the pool gets exactly the same number of calls over time. Poll mode is useful when you need strict per-number call volume control and want to ensure that no number in the pool is ever used more than any other.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The drawback of Poll mode is that the sequential pattern might be detectable by sophisticated carrier fraud detection systems that analyze calling patterns. If a carrier sees caller IDs rotating in exact sequence (A, B, C, D, A, B, C, D), it may flag this as automated rotation behavior. For most deployments, Random mode is the safer choice for avoiding carrier detection.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">\ud83d\udccb Aspect<\/th><th class=\"has-text-align-left\" data-align=\"left\">\ud83c\udfb2 Random Mode<\/th><th class=\"has-text-align-left\" data-align=\"left\">\ud83d\udd04 Poll Mode<\/th><\/tr><tr><td>Selection method<\/td><td>Random for each call<\/td><td>Sequential round-robin<\/td><\/tr><tr><td>Distribution<\/td><td>Statistically even<\/td><td>Perfectly even<\/td><\/tr><tr><td>Carrier detection risk<\/td><td>Low (no pattern)<\/td><td>Medium (sequential pattern)<\/td><\/tr><tr><td>Per-number volume control<\/td><td>Good (statistical)<\/td><td>Excellent (exact)<\/td><\/tr><tr><td>Best for<\/td><td>Most outbound call centers<\/td><td>Strict volume control needed<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"vos-3000-caller-number-pool-multiplexes-setting\">VOS3000 Caller Number Pool: Multiplexes Setting<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The Multiplexes setting in the VOS3000 caller number pool configuration controls the maximum number of concurrent calls that can use the same caller ID number simultaneously. This is a critical setting for managing per-number load and preventing carrier rate-limiting at the concurrency level.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"how-multiplexes-works\">How Multiplexes Works<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">When a new outbound call is made through the routing gateway, VOS3000 selects a number from the caller number pool. If the Multiplexes value is set to 5, VOS3000 allows up to 5 concurrent calls to use the same pool number at the same time. When a 6th call arrives and the selected number already has 5 active calls, VOS3000 selects a different number from the pool that has not reached its multiplexes limit. If all numbers in the pool have reached their multiplexes limit, VOS3000 falls back to using the original caller ID from the mapping gateway.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">\u2699\ufe0f Multiplexes Value<\/th><th class=\"has-text-align-left\" data-align=\"left\">\ud83d\udcca 50-Number Pool Max CC<\/th><th class=\"has-text-align-left\" data-align=\"left\">\ud83c\udfaf Best For<\/th><\/tr><tr><td>0 (unlimited)<\/td><td>No per-number limit<\/td><td>Carriers without concurrency limits<\/td><\/tr><tr><td>1<\/td><td>50 concurrent calls<\/td><td>Strict per-number concurrency control<\/td><\/tr><tr><td>5<\/td><td>250 concurrent calls<\/td><td>Balanced load distribution<\/td><\/tr><tr><td>10<\/td><td>500 concurrent calls<\/td><td>Higher volume with moderate control<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Setting Multiplexes to 0 means unlimited concurrent calls per number, which effectively disables the per-number concurrency control while still rotating numbers between calls. For most carrier deployments, a value of 3-5 provides good balance between call capacity and per-number load distribution.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"vos-3000-caller-number-pool-forward-signal-rewrite-sequence\">VOS3000 Caller Number Pool: FORWARD_SIGNAL_REWRITE_SEQUENCE<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The FORWARD_SIGNAL_REWRITE_SEQUENCE parameter in softswitch.conf controls the caller number rewrite behavior for forwarded calls when using the caller number pool. This parameter determines how VOS3000 rewrites the forwarding signal&#8217;s caller ID when a call is forwarded through another gateway.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"configuring-softswitch-conf\">Configuring softswitch.conf<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">To configure the forwarding signal rewrite sequence, edit the softswitch.conf file on your VOS3000 server and add or modify the FORWARD_SIGNAL_REWRITE_SEQUENCE parameter. This parameter accepts a comma-separated list of values that define the rewrite sequence for forwarded calls:<\/p>\n\n\n\n<pre class=\"wp-block-preformatted\"># Edit softswitch.conf\n# Location: \/home\/vos3000\/softswitch.conf or similar path\n\n# FORWARD_SIGNAL_REWRITE_SEQUENCE options:\n# Controls how forwarding signal caller ID is rewritten\n# when Enable Forwarding Signal Caller Pool is active\n\n# Add or modify this line:\nFORWARD_SIGNAL_REWRITE_SEQUENCE=caller_number_pool\n\n# After modifying, restart VOS3000 services\n# \/etc\/init.d\/vos3000 restart\n<\/pre>\n\n\n\n<p class=\"wp-block-paragraph\">After modifying softswitch.conf, you must restart the VOS3000 softswitch service for the changes to take effect. Always make configuration changes during a maintenance window to minimize service disruption. For more on caller ID management, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-caller-id-remote-party-id-transform\/\" target=\"_blank\" rel=\"noreferrer noopener\">VOS3000 Caller ID and Remote-Party-ID transform guide<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"vos-3000-caller-number-pool-interaction-with-number-transform\">VOS3000 Caller Number Pool: Interaction with Number Transform<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The caller number pool works alongside VOS3000&#8217;s Number Transform rules, and understanding their interaction prevents unexpected caller ID behavior on outbound calls. Number Transform rules (configured per gateway) modify the caller or callee number before the call is routed, while the caller number pool replaces the caller ID entirely with a number from the pool.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"order-of-operations\">Order of Operations<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">When both Number Transform and caller number pool are configured on a routing gateway, the order of operations matters. VOS3000 first applies Number Transform rules to the original caller ID, then the caller number pool replaces the transformed caller ID with a number from the pool. This means Number Transform rules applied to the caller number will not affect the final caller ID when the caller number pool is active, because the pool number overwrites whatever the transform produced.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you need to apply Number Transform rules to the pool numbers themselves (for example, adding a country code prefix to all pool numbers), you should configure the pool numbers with the required prefix already included, rather than relying on Number Transform rules to modify them after selection. For Number Transform configuration details, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-number-transform\/\" target=\"_blank\" rel=\"noreferrer noopener\">VOS3000 Number Transform guide<\/a> and our <a href=\"https:\/\/multahost.com\/blog\/callee-rewrite-rule-prefix-conversion-clients-vendor-prefix-settings-in-vos3000\/\" target=\"_blank\" rel=\"noreferrer noopener\">callee rewrite rule guide<\/a>.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">\ud83d\udccb Aspect<\/th><th class=\"has-text-align-left\" data-align=\"left\">\ud83d\udd04 Number Transform<\/th><th class=\"has-text-align-left\" data-align=\"left\">\ud83c\udfb1 Caller Number Pool<\/th><\/tr><tr><td>What it modifies<\/td><td>Adds\/removes prefixes from caller ID<\/td><td>Replaces caller ID entirely<\/td><\/tr><tr><td>Scope<\/td><td>Per-gateway transform rules<\/td><td>Per-gateway pool of numbers<\/td><\/tr><tr><td>When applied<\/td><td>Before caller number pool<\/td><td>After Number Transform (overrides)<\/td><\/tr><tr><td>Result on caller ID<\/td><td>Modified original number<\/td><td>Completely different pool number<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"testing-vos-3000-caller-number-pool\">Testing VOS3000 Caller Number Pool<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">After configuring the caller number pool, testing verifies that CLI rotation is working correctly and that each outbound call uses a different caller ID from the pool. The best testing method combines VOS3000 CDR analysis with SIP trace verification.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"testing-procedure\">Testing Procedure<\/h3>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Enable Debug Trace:<\/strong> Navigate to Operation Management > Debug Trace and enable SIP Trace<\/li>\n\n\n\n<li><strong>Make multiple test calls:<\/strong> Place at least 10 test calls through the routing gateway with caller number pool enabled<\/li>\n\n\n\n<li><strong>Check CDR records:<\/strong> Query the CDR for your test calls and examine the &#8220;Caller&#8221; field to verify different numbers were used<\/li>\n\n\n\n<li><strong>Verify in SIP trace:<\/strong> In the debug trace, check the From header and P-Asserted-Identity header of each INVITE to confirm the caller ID matches pool numbers<\/li>\n\n\n\n<li><strong>Check multiplexes:<\/strong> Make concurrent calls and verify that the multiplexes limit is respected per number<\/li>\n\n\n\n<li><strong>Verify rotation mode:<\/strong> For Poll mode, confirm numbers are selected in sequence; for Random mode, confirm the selection appears random<\/li>\n<\/ol>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">\ud83e\uddea Test Item<\/th><th class=\"has-text-align-left\" data-align=\"left\">\ud83d\udccb How to Verify<\/th><th class=\"has-text-align-left\" data-align=\"left\">\u2705 Expected Result<\/th><\/tr><tr><td>CLI rotation active<\/td><td>Check CDR caller field for 10 calls<\/td><td>Different numbers in each CDR<\/td><\/tr><tr><td>SIP From header<\/td><td>Check SIP trace INVITE From header<\/td><td>From header shows pool number<\/td><\/tr><tr><td>Multiplexes limit<\/td><td>Make concurrent calls, check CDR<\/td><td>No number exceeds limit<\/td><\/tr><tr><td>Rotation mode<\/td><td>Track number sequence in CDR<\/td><td>Random or sequential per mode<\/td><\/tr><tr><td>Pool exhaustion<\/td><td>Make calls exceeding pool capacity<\/td><td>Falls back to original caller ID<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"vos-3000-caller-number-pool-best-practices\">VOS3000 Caller Number Pool: Best Practices<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Following these best practices ensures your caller number pool configuration provides maximum benefit without causing carrier issues or configuration problems.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"pool-size-recommendations\">Pool Size Recommendations<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The number of phone numbers in your caller number pool should be sized based on your daily outbound call volume and the carrier&#8217;s per-number rate limit. A good rule of thumb is to have enough numbers so that each number handles no more than 200-300 calls per day. For a call center making 10,000 daily calls, a pool of 50 numbers provides 200 calls per number per day, which is well within most carrier rate limits. Larger operations should proportionally increase the pool size.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"number-format-consistency\">Number Format Consistency<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">All numbers in the caller number pool must use a consistent format that the carrier expects. If the carrier requires numbers with country code (e.g., +8801911119966), all pool numbers must include the country code. Mixing formats (some with country code, some without) causes some calls to display incorrect caller IDs. Test with a few calls first and verify the carrier accepts the number format before adding large numbers to the pool.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"monitor-cdr-for-rotation-verification\">Monitor CDR for Rotation Verification<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Regularly check your CDR records to verify that CLI rotation is working as expected. Look for any patterns where a single number appears more frequently than it should, which might indicate a configuration issue with the pool or a multiplexes setting that is too high. Setting up a daily CDR analysis to count calls per caller ID number helps you catch rotation problems early before they impact ASR.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">For professional VOS3000 call center configuration assistance, contact us on WhatsApp at <strong>+8801911119966<\/strong>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"related-resources\">Related Resources<\/h2>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\ud83d\udcd6 <a href=\"https:\/\/multahost.com\/blog\/callee-rewrite-rule-prefix-conversion-clients-vendor-prefix-settings-in-vos3000\/\" target=\"_blank\" rel=\"noreferrer noopener\">VOS3000 Callee Rewrite Rule Prefix Conversion<\/a><\/li>\n\n\n\n<li>\ud83d\udcd6 <a href=\"https:\/\/multahost.com\/blog\/vos3000-caller-id-remote-party-id-transform\/\" target=\"_blank\" rel=\"noreferrer noopener\">VOS3000 Caller ID and Remote-Party-ID Transform<\/a><\/li>\n\n\n\n<li>\ud83d\udcd6 <a href=\"https:\/\/multahost.com\/blog\/vos3000-number-transform\/\" target=\"_blank\" rel=\"noreferrer noopener\">VOS3000 Number Transform Guide<\/a><\/li>\n\n\n\n<li>\ud83d\udcd6 <a href=\"https:\/\/multahost.com\/blog\/vos3000-vicidial-sip-trunk-integration\/\" target=\"_blank\" rel=\"noreferrer noopener\">VOS3000 VICIDial SIP Trunk Integration<\/a><\/li>\n\n\n\n<li>\ud83d\udcd6 <a href=\"https:\/\/multahost.com\/blog\/vos3000-ai-dialer-vicidial-outbound-center\/\" target=\"_blank\" rel=\"noreferrer noopener\">VOS3000 AI Dialer VICIDial Outbound Center<\/a><\/li>\n\n\n\n<li>\ud83d\udce5 <a href=\"https:\/\/www.vos3000.com\/downloads.php\" target=\"_blank\" rel=\"noreferrer noopener\">VOS3000 Downloads &#8211; Manual and Software<\/a><\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"frequently-asked-questions-about-vos-3000-caller-number-pool\">Frequently Asked Questions About VOS3000 Caller Number Pool<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"what-is-the-vos-3000-caller-number-pool\">What is the VOS3000 caller number pool?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The VOS3000 caller number pool is a feature that rotates the outbound caller ID across a pool of configured phone numbers for each call routed through a specific routing gateway. This distributes calls across multiple numbers, preventing any single number from being rate-limited or blocked by the carrier. It is configured in the routing gateway&#8217;s Additional Settings &gt; Others section, documented in VOS3000 Manual Section 2.5.1.1.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"what-is-the-difference-between-random-and-poll-mode-in-vos-3000-caller-number-pool\">What is the difference between Random and Poll mode in VOS3000 caller number pool?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Random mode selects a pool number randomly for each call, providing statistically even distribution without a predictable pattern. Poll mode selects numbers in sequential order (round-robin), providing perfectly even distribution but with a sequential pattern that carriers might detect. Random mode is recommended for most deployments because it is less likely to trigger carrier fraud detection systems.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"what-does-the-multiplexes-setting-do-in-the-caller-number-pool\">What does the Multiplexes setting do in the caller number pool?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The Multiplexes setting controls the maximum number of concurrent calls that can use the same pool number simultaneously. For example, a Multiplexes value of 5 means up to 5 calls can use the same caller ID number at the same time. When the limit is reached, VOS3000 selects a different number from the pool. Setting it to 0 means unlimited concurrent calls per number. For help configuring this, contact us on WhatsApp at <strong>+8801911119966<\/strong>.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"how-do-i-test-if-the-vos-3000-caller-number-pool-is-working\">How do I test if the VOS3000 caller number pool is working?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Enable SIP Debug Trace, make 10 test calls through the gateway with caller number pool enabled, then check the CDR records. Each CDR should show a different caller number from the pool. Also verify in the SIP trace that the From header and P-Asserted-Identity header contain pool numbers instead of the original caller ID.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"can-i-use-different-caller-number-pools-for-different-routing-gateways\">Can I use different caller number pools for different routing gateways?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Yes, the caller number pool is configured per routing gateway. Each gateway can have its own set of pool numbers with different rotation modes and multiplexes settings. This allows you to use different CLI rotation strategies for different carriers or traffic types.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"does-the-caller-number-pool-work-with-number-transform-rules\">Does the caller number pool work with Number Transform rules?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The caller number pool overwrites the caller ID after Number Transform rules are applied. If both are configured, VOS3000 first applies Number Transform rules to the original caller ID, then the caller number pool replaces it with a number from the pool. To apply prefix modifications to pool numbers, include the prefix directly in the pool number configuration rather than relying on Number Transform rules.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"get-professional-help-with-vos-3000-caller-number-pool\">Get Professional Help with VOS3000 Caller Number Pool<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Configuring VOS3000 caller number pool for call center and high-volume outbound operations requires expertise in VOS3000 routing, SIP caller ID management, and carrier integration. Our team has extensive experience deploying CLI rotation solutions for VoIP operators and call centers worldwide.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Contact us on WhatsApp: +8801911119966<\/strong><\/p>\n\n\n\n<p class=\"wp-block-paragraph\">We offer complete VOS3000 call center configuration services including caller number pool setup, VICIDial integration, routing optimization, and carrier connectivity. Whether you need help configuring CLI rotation or designing a complete outbound calling infrastructure, we can ensure your deployment operates efficiently and reliably.<\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udcde-need-call-center-setup-support\">\ud83d\udcde Need Professional VOS3000 Setup Support?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For professional VOS3000 installations and deployment, VOS3000 Server Rental Solution:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcf1 <strong>WhatsApp:<\/strong> <a href=\"https:\/\/wa.me\/8801911119966\" target=\"_blank\" rel=\"noopener\">+8801911119966<\/a><br>\ud83c\udf10 <strong>Website:<\/strong> <a href=\"https:\/\/www.vos3000.com\">www.vos3000.com<\/a><br>\ud83c\udf10 <strong>Blog:<\/strong> <a href=\"https:\/\/multahost.com\/blog\" target=\"_blank\" rel=\"noopener\">multahost.com\/blog<\/a><br>\ud83d\udce5 <strong>Downloads:<\/strong> <a href=\"https:\/\/www.vos3000.com\/downloads.php\">VOS3000 Downloads<\/a><\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td><img decoding=\"async\" src=\"https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-7-1024x683.png\" alt=\"VOS3000 SIP Debug with Wireshark, VOS3000 Outbound SIP Registration, VOS3000 Scaling High Traffic, VOS3000 Protect Route, VOS3000 Caller Number Pool\"><\/td><td><img decoding=\"async\" src=\"https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-7-1024x683.png\" alt=\"VOS3000 SIP Debug with Wireshark, VOS3000 Outbound SIP Registration, VOS3000 Scaling High Traffic, VOS3000 Protect Route, VOS3000 Caller Number Pool\"><\/td><td><img decoding=\"async\" src=\"https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-7-1024x683.png\" alt=\"VOS3000 SIP Debug with Wireshark, VOS3000 Outbound SIP Registration, VOS3000 Scaling High Traffic, VOS3000 Protect Route, VOS3000 Caller Number Pool\"><\/td><\/tr><\/tbody><\/table><\/figure>\n","protected":false},"excerpt":{"rendered":"<p>VOS3000 caller number pool configuration for CLI rotation on outbound calls. Setup random and poll mode CLI rotation, multiplexes per-number concurrency, and forwarding signal caller pool.<\/p>\n","protected":false},"author":1,"featured_media":1195,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_kadence_starter_templates_imported_post":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_post_was_ever_published":false},"categories":[1],"tags":[6243,6242,6221,6238,6216,6236,4777,6245,6247,6214,1151,6248,6226,6240,6232,6235,6237,6206,6205,6246,6224,6219,6239,6222,6213,6212,6233,6218,6234,6211,6249,6231,6209,5421,6225,6217,6230,6223,6208,6244,6204,6210,6207,6228,6220,6227,6241,6215,6229],"class_list":["post-1201","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-vos3000-softswitch","tag-vos3000-2-1-8-05-caller-pool","tag-vos3000-2-1-9-07-caller-pool","tag-vos3000-additional-settings-caller-pool","tag-vos3000-anti-blocking-cli-rotation","tag-vos3000-call-center-cli","tag-vos3000-call-center-dialer-cli","tag-vos3000-caller-id-management","tag-vos3000-caller-id-pool-guide","tag-vos3000-caller-id-rotation","tag-vos3000-caller-id-rotation-outbound","tag-vos3000-caller-number-pool","tag-vos3000-caller-number-pool-configuration","tag-vos3000-caller-pool-random-poll","tag-vos3000-caller-pool-testing","tag-vos3000-caller-pool-vos3000-manual","tag-vos3000-carrier-cli-rotation","tag-vos3000-carrier-rate-limit-cli","tag-vos3000-cli-pool","tag-vos3000-cli-rotation","tag-vos3000-cli-rotation-how-to","tag-vos3000-cli-rotation-modes","tag-vos3000-cli-rotation-setup","tag-vos3000-cli-rotation-troubleshooting","tag-vos3000-enable-caller-number-pool","tag-vos3000-forward_signal_rewrite_sequence","tag-vos3000-forwarding-signal-caller-pool","tag-vos3000-gateway-cli-settings","tag-vos3000-multiple-caller-id","tag-vos3000-multiple-outbound-numbers","tag-vos3000-multiplexes-caller-pool","tag-vos3000-number-pool-configuration","tag-vos3000-number-rewrite-pool","tag-vos3000-number-rotation","tag-vos3000-outbound-caller-id","tag-vos3000-outbound-number-management","tag-vos3000-outbound-number-rotation","tag-vos3000-outbound-presentation-number","tag-vos3000-per-number-concurrency","tag-vos3000-poll-mode-cli","tag-vos3000-professional-cli-setup","tag-vos3000-random-cli","tag-vos3000-random-mode-cli","tag-vos3000-rcli","tag-vos3000-round-robin-cli","tag-vos3000-routing-gateway-caller-pool","tag-vos3000-sequential-cli-rotation","tag-vos3000-sip-trace-cli-rotation","tag-vos3000-softswitch-conf-caller-pool","tag-vos3000-voip-cli-management"],"acf":[],"jetpack_featured_media_url":"https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-5.png","blog_post_layout_featured_media_urls":{"thumbnail":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-5-150x150.png",150,150,true],"full":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-5.png",1536,1024,false]},"categories_names":{"1":{"name":"VOS3000 Softswitch","link":"https:\/\/www.vos3000.com\/blog\/category\/vos3000-softswitch\/"}},"tags_names":{"6243":{"name":"VOS3000 2.1.8.05 caller pool","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-2-1-8-05-caller-pool\/"},"6242":{"name":"VOS3000 2.1.9.07 caller pool","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-2-1-9-07-caller-pool\/"},"6221":{"name":"VOS3000 additional settings caller pool","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-additional-settings-caller-pool\/"},"6238":{"name":"VOS3000 anti-blocking CLI rotation","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-anti-blocking-cli-rotation\/"},"6216":{"name":"VOS3000 call center CLI","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-call-center-cli\/"},"6236":{"name":"VOS3000 call center dialer CLI","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-call-center-dialer-cli\/"},"4777":{"name":"VOS3000 caller ID management","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-caller-id-management\/"},"6245":{"name":"VOS3000 caller ID pool guide","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-caller-id-pool-guide\/"},"6247":{"name":"VOS3000 caller ID rotation","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-caller-id-rotation\/"},"6214":{"name":"VOS3000 caller ID rotation outbound","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-caller-id-rotation-outbound\/"},"1151":{"name":"VOS3000 caller number pool","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-caller-number-pool\/"},"6248":{"name":"VOS3000 caller number pool configuration","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-caller-number-pool-configuration\/"},"6226":{"name":"VOS3000 caller pool random poll","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-caller-pool-random-poll\/"},"6240":{"name":"VOS3000 caller pool testing","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-caller-pool-testing\/"},"6232":{"name":"VOS3000 caller pool VOS3000 manual","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-caller-pool-vos3000-manual\/"},"6235":{"name":"VOS3000 carrier CLI rotation","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-carrier-cli-rotation\/"},"6237":{"name":"VOS3000 carrier rate limit CLI","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-carrier-rate-limit-cli\/"},"6206":{"name":"VOS3000 CLI pool","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-cli-pool\/"},"6205":{"name":"VOS3000 CLI rotation","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-cli-rotation\/"},"6246":{"name":"VOS3000 CLI rotation how to","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-cli-rotation-how-to\/"},"6224":{"name":"VOS3000 CLI rotation modes","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-cli-rotation-modes\/"},"6219":{"name":"VOS3000 CLI rotation setup","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-cli-rotation-setup\/"},"6239":{"name":"VOS3000 CLI rotation troubleshooting","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-cli-rotation-troubleshooting\/"},"6222":{"name":"VOS3000 enable caller number pool","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-enable-caller-number-pool\/"},"6213":{"name":"VOS3000 FORWARD_SIGNAL_REWRITE_SEQUENCE","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-forward_signal_rewrite_sequence\/"},"6212":{"name":"VOS3000 forwarding signal caller pool","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-forwarding-signal-caller-pool\/"},"6233":{"name":"VOS3000 gateway CLI settings","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-gateway-cli-settings\/"},"6218":{"name":"VOS3000 multiple caller ID","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-multiple-caller-id\/"},"6234":{"name":"VOS3000 multiple outbound numbers","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-multiple-outbound-numbers\/"},"6211":{"name":"VOS3000 multiplexes caller pool","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-multiplexes-caller-pool\/"},"6249":{"name":"VOS3000 number pool configuration","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-number-pool-configuration\/"},"6231":{"name":"VOS3000 number rewrite pool","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-number-rewrite-pool\/"},"6209":{"name":"VOS3000 number rotation","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-number-rotation\/"},"5421":{"name":"VOS3000 outbound caller ID","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-outbound-caller-id\/"},"6225":{"name":"VOS3000 outbound number management","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-outbound-number-management\/"},"6217":{"name":"VOS3000 outbound number rotation","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-outbound-number-rotation\/"},"6230":{"name":"VOS3000 outbound presentation number","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-outbound-presentation-number\/"},"6223":{"name":"VOS3000 per-number concurrency","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-per-number-concurrency\/"},"6208":{"name":"VOS3000 poll mode CLI","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-poll-mode-cli\/"},"6244":{"name":"VOS3000 professional CLI setup","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-professional-cli-setup\/"},"6204":{"name":"VOS3000 random CLI","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-random-cli\/"},"6210":{"name":"VOS3000 random mode CLI","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-random-mode-cli\/"},"6207":{"name":"VOS3000 RCLI","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rcli\/"},"6228":{"name":"VOS3000 round robin CLI","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-round-robin-cli\/"},"6220":{"name":"VOS3000 routing gateway caller pool","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-routing-gateway-caller-pool\/"},"6227":{"name":"VOS3000 sequential CLI rotation","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-sequential-cli-rotation\/"},"6241":{"name":"VOS3000 SIP trace CLI rotation","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-sip-trace-cli-rotation\/"},"6215":{"name":"VOS3000 softswitch.conf caller pool","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-softswitch-conf-caller-pool\/"},"6229":{"name":"VOS3000 VoIP CLI management","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-voip-cli-management\/"}},"comments_number":"0","wpmagazine_modules_lite_featured_media_urls":{"thumbnail":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-5-150x150.png",150,150,true],"cvmm-medium":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-5-300x300.png",300,300,true],"cvmm-medium-plus":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-5-305x207.png",305,207,true],"cvmm-portrait":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-5-400x600.png",400,600,true],"cvmm-medium-square":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-5-600x600.png",600,600,true],"cvmm-large":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-5-1024x1024.png",1024,1024,true],"cvmm-small":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-5-130x95.png",130,95,true],"full":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-SIP-Debug-with-Wireshark-VOS3000-Outbound-SIP-Registration-VOS3000-Scaling-High-Traffic-VOS3000-Protect-Route-VOS3000-Caller-Number-Pool-5.png",1536,1024,false]},"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/posts\/1201","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/comments?post=1201"}],"version-history":[{"count":1,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/posts\/1201\/revisions"}],"predecessor-version":[{"id":1209,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/posts\/1201\/revisions\/1209"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/media\/1195"}],"wp:attachment":[{"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/media?parent=1201"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/categories?post=1201"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/tags?post=1201"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}