{"id":1438,"date":"2026-04-27T16:31:04","date_gmt":"2026-04-27T16:31:04","guid":{"rendered":"https:\/\/www.vos3000.com\/blog\/?p=1438"},"modified":"2026-04-27T16:31:14","modified_gmt":"2026-04-27T16:31:14","slug":"vos3000-check-rate-before","status":"publish","type":"post","link":"https:\/\/www.vos3000.com\/blog\/vos3000-check-rate-before\/","title":{"rendered":"VOS3000 Check Rate Before Routing Reliable Rate Existence Verification"},"content":{"rendered":"\n<h1 class=\"wp-block-heading\" id=\"vos-3000-check-rate-before-routing-reliable-rate-existence-verification\">VOS3000 Check Rate Before Routing Reliable Rate Existence Verification<\/h1>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcb0 Every VoIP operator&#8217;s worst nightmare is discovering that calls have been routing through a gateway for hours \u2014 or days \u2014 without any billing rate configured for the destination. These unbilled calls represent pure revenue leakage: you pay the carrier but never charge the customer. The <strong>VOS3000 check rate before routing<\/strong> feature prevents this by verifying that a clearing fee rate exists for the destination before allowing the call to route through the gateway. When no rate is found, the gateway is skipped, ensuring that every routed call has a billable rate attached. \ud83d\udd27<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2699\ufe0f According to the VOS3000 V2.1.9.07 Manual \u00a72.5.1.1 (page 33), the VOS3000 check rate before routing is defined simply: &#8220;Check rate: if the call has clearing fee rate, this gateway will be tried.&#8221; This means that when Check rate is enabled for a gateway, VOS3000 verifies the existence of a clearing fee rate for the called destination before routing the call through that gateway. If no rate exists, the gateway is excluded from the routing selection. The VOS3000 check rate before routing feature is a per-gateway setting configured in the Additional settings &gt; Normal panel. \ud83d\udcca<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83c\udfaf This guide provides a complete, manual-verified reference for the VOS3000 check rate before routing feature. All parameter definitions are sourced exclusively from the official VOS3000 V2.1.9.07 Manual \u00a72.5.1.1 (page 33). No fabricated values, no guesswork. For expert assistance, contact us on WhatsApp at <strong>+8801911119966<\/strong>. \ud83d\udcd8<\/p>\n\n\n\n<div class=\"wp-block-rank-math-toc-block\" id=\"rank-math-toc\"><h2>Table of Contents<\/h2><nav><ul><li><a href=\"#vos-3000-check-rate-before-routing-reliable-rate-existence-verification\">VOS3000 Check Rate Before Routing Reliable Rate Existence Verification<\/a><ul><li><a href=\"#\ud83d\udd10-what-is-vos-3000-check-rate-before-routing\">\ud83d\udd10 What Is VOS3000 Check Rate Before Routing?<\/a><\/li><li><a href=\"#\ud83d\udccb-vos-3000-check-rate-before-routing-parameter-reference\">\ud83d\udccb VOS3000 Check Rate Before Routing Parameter Reference<\/a><\/li><li><a href=\"#\ud83d\udcca-why-routing-without-rate-verification-causes-revenue-leakage\">\ud83d\udcca Why Routing Without Rate Verification Causes Revenue Leakage<\/a><\/li><li><a href=\"#\ud83d\udd04-how-vos-3000-check-rate-before-routing-interacts-with-other-safeguards\">\ud83d\udd04 How VOS3000 Check Rate Before Routing Interacts with Other Safeguards<\/a><\/li><li><a href=\"#\ud83d\udcca-vos-3000-check-rate-before-routing-configuration-scenarios\">\ud83d\udcca VOS3000 Check Rate Before Routing Configuration Scenarios<\/a><\/li><li><a href=\"#\ud83d\udee1\ufe0f-common-vos-3000-check-rate-before-routing-problems-and-solutions\">\ud83d\udee1\ufe0f Common VOS3000 Check Rate Before Routing Problems and Solutions<\/a><ul><li><a href=\"#\u274c-problem-1-legitimate-calls-blocked-by-check-rate\">\u274c Problem 1: Legitimate Calls Blocked by Check Rate<\/a><\/li><li><a href=\"#\u274c-problem-2-revenue-leakage-despite-check-rate-enabled\">\u274c Problem 2: Revenue Leakage Despite Check Rate Enabled<\/a><\/li><li><a href=\"#\u274c-problem-3-check-rate-blocking-new-destinations\">\u274c Problem 3: Check Rate Blocking New Destinations<\/a><\/li><\/ul><\/li><li><a href=\"#\ud83d\udca1-vos-3000-check-rate-before-routing-best-practices\">\ud83d\udca1 VOS3000 Check Rate Before Routing Best Practices<\/a><\/li><li><a href=\"#\ud83d\udccb-vos-3000-check-rate-before-routing-quick-decision-table\">\ud83d\udccb VOS3000 Check Rate Before Routing Quick Decision Table<\/a><\/li><li><a href=\"#\u2753-frequently-asked-questions\">\u2753 Frequently Asked Questions<\/a><ul><li><a href=\"#\u2753-what-is-the-vos-3000-check-rate-before-routing\">\u2753 What is the VOS3000 check rate before routing?<\/a><\/li><li><a href=\"#\u2753-does-check-rate-verify-the-caller-rate-or-the-clearing-rate\">\u2753 Does Check rate verify the caller rate or the clearing rate?<\/a><\/li><li><a href=\"#\u2753-what-happens-when-check-rate-is-disabled\">\u2753 What happens when Check rate is disabled?<\/a><\/li><li><a href=\"#\u2753-can-i-enable-check-rate-on-some-gateways-and-disable-on-others\">\u2753 Can I enable Check rate on some gateways and disable on others?<\/a><\/li><li><a href=\"#\u2753-how-does-check-rate-interact-with-sort-by-lowest-rate-per-second\">\u2753 How does Check rate interact with Sort by lowest rate per second?<\/a><\/li><li><a href=\"#\u2753-should-i-enable-check-rate-on-emergency-service-gateways\">\u2753 Should I enable Check rate on emergency service gateways?<\/a><\/li><\/ul><\/li><li><a href=\"#\ud83d\udcde-need-expert-help-with-vos-3000-check-rate-before-routing\">\ud83d\udcde Need Expert Help with VOS3000 Check Rate Before Routing?<\/a><\/li><li><a href=\"#\ud83d\udcde-need-call-center-setup-support\">\ud83d\udcde Need Professional VOS3000 Setup Support?<\/a><\/li><\/ul><\/li><\/ul><\/nav><\/div>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udd10-what-is-vos-3000-check-rate-before-routing\">\ud83d\udd10 What Is VOS3000 Check Rate Before Routing?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udccb The <strong>VOS3000 check rate before routing<\/strong> is a per-gateway safeguard that verifies the existence of a clearing fee rate for the destination before routing the call through the gateway. It acts as a gatekeeper: no rate means no routing. This prevents unbilled calls and ensures that every call that passes through the gateway has a corresponding billing entry in the rate table.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Key characteristics of Check Rate:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\ud83d\udcb0 <strong>Configuration location:<\/strong> Routing gateway > Additional settings > Normal > Check rate<\/li>\n\n\n\n<li>\ud83d\udeab <strong>Action when no rate exists:<\/strong> The gateway is excluded from routing selection for that call<\/li>\n\n\n\n<li>\u2705 <strong>Action when rate exists:<\/strong> The gateway is included in normal routing selection<\/li>\n\n\n\n<li>\ud83d\udccb <strong>Per-gateway scope:<\/strong> Each routing gateway has its own VOS3000 check rate before routing setting<\/li>\n\n\n\n<li>\ud83d\udcca <strong>Rate type checked:<\/strong> Clearing fee rate (vendor\/carrier rate), not the caller fee rate<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udccb-vos-3000-check-rate-before-routing-parameter-reference\">\ud83d\udccb VOS3000 Check Rate Before Routing Parameter Reference<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Attribute<\/th><th class=\"has-text-align-left\" data-align=\"left\">Detail<\/th><\/tr><tr><td>\ud83d\udccc Setting Name<\/td><td>Check rate<\/td><\/tr><tr><td>\ud83d\udcdd Manual Description<\/td><td>&#8220;If the call has clearing fee rate, this gateway will be tried&#8221; (VOS3000 V2.1.9.07 Manual \u00a72.5.1.1, page 33)<\/td><\/tr><tr><td>\ud83d\udccd Configuration Path<\/td><td>Routing gateway &gt; Additional settings &gt; Normal<\/td><\/tr><tr><td>\ud83d\udd04 Scope<\/td><td>Per gateway \u2014 each gateway can have Check rate enabled or disabled independently<\/td><\/tr><tr><td>\ud83d\udcca Rate Type Checked<\/td><td>Clearing fee rate (vendor rate)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udcca-why-routing-without-rate-verification-causes-revenue-leakage\">\ud83d\udcca Why Routing Without Rate Verification Causes Revenue Leakage<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udea8 When the VOS3000 check rate before routing is disabled, calls can route through a gateway even when no clearing fee rate exists for the destination in the vendor rate table. This creates a dangerous gap in your billing chain: the call is connected, the carrier bills you for the traffic, but your billing system has no rate to charge the customer. The result is pure revenue leakage.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Scenario<\/th><th class=\"has-text-align-left\" data-align=\"left\">Without VOS3000 Check Rate Before Routing<\/th><th class=\"has-text-align-left\" data-align=\"left\">With VOS3000 Check Rate Before Routing<\/th><\/tr><tr><td>New destination not in rate table<\/td><td>\ud83d\udd34 Call routes \u2014 carrier bills you, no customer charge<\/td><td>\ud83d\udfe2 Gateway skipped \u2014 call routes through gateway with rate or fails safely<\/td><\/tr><tr><td>Rate table expired \/ deleted<\/td><td>\ud83d\udd34 Call routes at old rate or no rate \u2014 billing mismatch<\/td><td>\ud83d\udfe2 Gateway skipped \u2014 prevents routing without valid rate<\/td><\/tr><tr><td>Rate import failed silently<\/td><td>\ud83d\udd34 Calls route \u2014 no rate applied \u2014 zero revenue<\/td><td>\ud83d\udfe2 Calls blocked from gateway \u2014 forced to use route with rate<\/td><\/tr><tr><td>Wrong prefix in rate table<\/td><td>\ud83d\udd34 Prefix mismatch \u2014 rate not found \u2014 call unbilled<\/td><td>\ud83d\udfe2 Rate not found \u2014 gateway skipped \u2014 protects revenue<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Revenue impact calculation:<\/strong> If your system processes 10,000 calls per hour and 1% of those route without a valid rate at an average carrier cost of $0.03\/minute for a 3-minute call, you lose $9\/hour or $216\/day in unbilled revenue. Over a month, that is $6,480 in pure leakage that the VOS3000 check rate before routing would have prevented. For comprehensive billing protection, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-cdr-analysis-billing\/\" target=\"_blank\" rel=\"noopener\">CDR analysis and billing<\/a> guide.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udd04-how-vos-3000-check-rate-before-routing-interacts-with-other-safeguards\">\ud83d\udd04 How VOS3000 Check Rate Before Routing Interacts with Other Safeguards<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd17 The VOS3000 check rate before routing works alongside other gateway safeguards to create a comprehensive routing protection system. Understanding how the VOS3000 check rate before routing interacts with these other features is critical for designing an effective revenue assurance strategy.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Safeguard<\/th><th class=\"has-text-align-left\" data-align=\"left\">What It Checks<\/th><th class=\"has-text-align-left\" data-align=\"left\">How It Relates to VOS3000 Check Rate Before Routing<\/th><\/tr><tr><td>\u2705 Check rate<\/td><td>Does a clearing fee rate exist?<\/td><td>Primary filter \u2014 no rate = no routing<\/td><\/tr><tr><td>\ud83d\udcb0 Max minute rates<\/td><td>Is the per-minute rate below the ceiling?<\/td><td>Runs after Check rate passes \u2014 catches expensive rates<\/td><\/tr><tr><td>\ud83d\udcca Lowest profit rate limit<\/td><td>Is the profit margin sufficient?<\/td><td>Runs after Check rate passes \u2014 catches thin margins<\/td><\/tr><tr><td>\ud83d\udcde Line limit<\/td><td>Is the gateway within concurrency limits?<\/td><td>Independent \u2014 capacity check regardless of rate<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcca <strong>Evaluation order:<\/strong> When a call arrives and VOS3000 evaluates gateways, the VOS3000 check rate before routing is evaluated first in the rate-related checks. If Check rate is enabled and no clearing fee rate exists, the gateway is immediately excluded \u2014 the Max minute rates and Lowest profit rate limit are not evaluated because there is no rate to check. The VOS3000 check rate before routing is the gatekeeper that ensures all subsequent rate-based checks have valid data to work with. For more on routing safeguards, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-routing-optimization\/\" target=\"_blank\" rel=\"noopener\">routing optimization<\/a> guide.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udcca-vos-3000-check-rate-before-routing-configuration-scenarios\">\ud83d\udcca VOS3000 Check Rate Before Routing Configuration Scenarios<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Deployment<\/th><th>Check Rate Setting<\/th><th>Rationale<\/th><\/tr><tr><td>\ud83c\udfe2 Production retail VoIP<\/td><td>Enabled (always)<\/td><td>Every call must be billable \u2014 no exceptions<\/td><\/tr><tr><td>\ud83d\udd04 Wholesale termination<\/td><td>Enabled (always)<\/td><td>Wholesale margins are thin \u2014 unbilled calls are catastrophic<\/td><\/tr><tr><td>\ud83d\udce1 Emergency \/ toll-free gateway<\/td><td>Disabled<\/td><td>Emergency and toll-free calls must complete regardless of rate \u2014 <a href=\"https:\/\/multahost.com\/blog\/vos3000-billing-faq\/\" target=\"_blank\" rel=\"noopener\">billing<\/a> handled separately<\/td><\/tr><tr><td>\ud83e\uddea Test \/ lab gateway<\/td><td>Disabled<\/td><td>Test calls may not have rates \u2014 allow routing for testing purposes<\/td><\/tr><tr><td>\ud83d\udcb3 Calling card platform<\/td><td>Enabled (always)<\/td><td>Prepaid billing requires rate verification \u2014 cannot afford unbilled calls<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udee1\ufe0f-common-vos-3000-check-rate-before-routing-problems-and-solutions\">\ud83d\udee1\ufe0f Common VOS3000 Check Rate Before Routing Problems and Solutions<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u274c-problem-1-legitimate-calls-blocked-by-check-rate\">\u274c Problem 1: Legitimate Calls Blocked by Check Rate<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd0d <strong>Symptom:<\/strong> Calls to destinations that should have valid rates are being blocked by the VOS3000 check rate before routing, even though you believe the rates are properly configured.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Cause:<\/strong> The most common cause is a prefix mismatch between the called number and the rate table entry. For example, the rate table may have an entry for prefix &#8220;44&#8221; (UK) but the call is to &#8220;447&#8221; (UK mobile), and the rate table does not have a &#8220;447&#8221; entry. The VOS3000 check rate before routing looks for a rate matching the full dialed number prefix and finds no match.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2705 <strong>Solutions:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\ud83d\udd27 Verify rate table coverage \u2014 ensure all destination prefixes served by this gateway have corresponding clearing fee rate entries<\/li>\n\n\n\n<li>\ud83d\udcca Check the <a href=\"https:\/\/multahost.com\/blog\/callee-rewrite-rule-prefix-conversion-clients-vendor-prefix-settings-in-vos3000\/\" target=\"_blank\" rel=\"noopener\">prefix settings<\/a> to ensure called numbers match rate table entries<\/li>\n\n\n\n<li>\ud83d\udccb Review the gateway&#8217;s routing prefix configuration for correct prefix matching<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u274c-problem-2-revenue-leakage-despite-check-rate-enabled\">\u274c Problem 2: Revenue Leakage Despite Check Rate Enabled<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd0d <strong>Symptom:<\/strong> The VOS3000 check rate before routing is enabled, but CDR analysis shows calls with zero or missing billing rates.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Cause:<\/strong> Check rate only verifies the clearing fee rate (vendor rate). If the caller fee rate (customer rate) is missing but the clearing fee rate exists, the call routes but the customer is not charged. The VOS3000 check rate before routing does not verify the caller fee rate \u2014 only the clearing fee rate.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2705 <strong>Solutions:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\ud83d\udd27 Implement additional billing safeguards for caller fee rate verification in your <a href=\"https:\/\/multahost.com\/blog\/vos3000-cdr-billing-discrepancy\/\" target=\"_blank\" rel=\"noopener\">CDR billing discrepancy<\/a> process<\/li>\n\n\n\n<li>\ud83d\udcca Regularly audit both caller and clearing rate tables for completeness<\/li>\n\n\n\n<li>\ud83d\udccb Use the VOS3000 billing overdraft prevention feature to catch calls with incomplete billing data<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u274c-problem-3-check-rate-blocking-new-destinations\">\u274c Problem 3: Check Rate Blocking New Destinations<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd0d <strong>Symptom:<\/strong> After adding a new destination to your service, calls to that destination fail because the VOS3000 check rate before routing blocks all gateways.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udca1 <strong>Cause:<\/strong> The clearing fee rate for the new destination has not been added to any vendor rate table, so every gateway with Check rate enabled rejects the call.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\u2705 <strong>Solutions:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>\ud83d\udd27 Add the clearing fee rate for the new destination to the appropriate vendor rate table before enabling the service<\/li>\n\n\n\n<li>\ud83d\udcca Create a checklist for new destination activation that includes rate table updates as a mandatory step<\/li>\n\n\n\n<li>\ud83d\udccb Consider temporarily disabling VOS3000 check rate before routing on a test gateway during new destination rollout<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udca1-vos-3000-check-rate-before-routing-best-practices\">\ud83d\udca1 VOS3000 Check Rate Before Routing Best Practices<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Best Practice<\/th><th class=\"has-text-align-left\" data-align=\"left\">Recommendation<\/th><th class=\"has-text-align-left\" data-align=\"left\">Reason<\/th><\/tr><tr><td>\u2705 Enable on all production gateways<\/td><td>Turn on VOS3000 check rate before routing for every production routing gateway<\/td><td>\ud83d\udcb0 Prevents unbilled calls and revenue leakage<\/td><\/tr><tr><td>\ud83d\udcca Audit rate tables regularly<\/td><td>Ensure clearing fee rates cover all destinations served by each gateway<\/td><td>\ud83d\udd27 Prevents legitimate calls from being blocked by the VOS3000 check rate before routing<\/td><\/tr><tr><td>\ud83d\udccb Pair with Max minute rates<\/td><td>Enable both VOS3000 check rate before routing and Max minute rates<\/td><td>\ud83d\udee1\ufe0f Check rate verifies existence; Max minute rates cap excessive costs<\/td><\/tr><tr><td>\ud83d\udd04 Update rates before new destinations<\/td><td>Add clearing fee rates before enabling new destinations on gateways<\/td><td>\ud83d\udcca Prevents new-destination calls from being blocked by the VOS3000 check rate before routing<\/td><\/tr><tr><td>\ud83d\udcde Monitor CDR for zero-rate calls<\/td><td>Check <a href=\"https:\/\/multahost.com\/blog\/vos3000-call-end-reasons\/\" target=\"_blank\" rel=\"noopener\">call end reasons<\/a> in CDR for any calls that bypassed rate verification<\/td><td>\ud83d\udcc8 Catches any gaps in the VOS3000 check rate before routing coverage<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcac Need VOS3000 rate check help? <a href=\"https:\/\/wa.me\/8801911119966\" target=\"_blank\" rel=\"noopener\">WhatsApp +8801911119966<\/a><\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udccb-vos-3000-check-rate-before-routing-quick-decision-table\">\ud83d\udccb VOS3000 Check Rate Before Routing Quick Decision Table<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83c\udfaf Use this decision table to decide when to enable the VOS3000 check rate before routing on each gateway:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><th class=\"has-text-align-left\" data-align=\"left\">Gateway Type<\/th><th class=\"has-text-align-left\" data-align=\"left\">Check Rate Setting<\/th><th class=\"has-text-align-left\" data-align=\"left\">Rationale<\/th><\/tr><tr><td>Production wholesale gateway<\/td><td>Enabled (checked)<\/td><td>Prevents unbilled calls and revenue leakage in high-volume production environments<\/td><\/tr><tr><td>Test\/staging gateway<\/td><td>Disabled (unchecked)<\/td><td>Allows test calls without requiring a full rate table during configuration testing<\/td><\/tr><tr><td>New route with incomplete rate tables<\/td><td>Disabled temporarily<\/td><td>Enables route validation before rate tables are fully populated; re-enable after setup<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\u2753-frequently-asked-questions\">\u2753 Frequently Asked Questions<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-what-is-the-vos-3000-check-rate-before-routing\">\u2753 What is the VOS3000 check rate before routing?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcb0 The VOS3000 check rate before routing is a per-gateway setting that verifies a clearing fee rate exists for the destination before routing the call through that gateway. According to the VOS3000 V2.1.9.07 Manual \u00a72.5.1.1 (page 33): &#8220;Check rate: if the call has clearing fee rate, this gateway will be tried.&#8221; When enabled, the VOS3000 check rate before routing prevents calls from routing through gateways without a valid billing rate, eliminating unbilled calls and revenue leakage.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-does-check-rate-verify-the-caller-rate-or-the-clearing-rate\">\u2753 Does Check rate verify the caller rate or the clearing rate?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udccb The VOS3000 check rate before routing verifies the <strong>clearing fee rate<\/strong> (the rate you pay the vendor\/carrier), not the caller fee rate (the rate you charge the customer). The manual explicitly states &#8220;if the call has clearing fee rate, this gateway will be tried.&#8221; This means that even if the caller fee rate is missing, the call will still route as long as the clearing fee rate exists. To protect against missing caller rates, you need separate billing safeguards in addition to the VOS3000 check rate before routing.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-what-happens-when-check-rate-is-disabled\">\u2753 What happens when Check rate is disabled?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\u26a0\ufe0f When the VOS3000 check rate before routing is disabled, VOS3000 does not verify whether a clearing fee rate exists for the destination. The call can route through the gateway regardless of rate availability. This means calls may complete without any corresponding billing rate, resulting in unbilled traffic. The VOS3000 check rate before routing should only be disabled on gateways where rate-independent routing is acceptable, such as emergency services gateways, toll-free number gateways, or test environments where billing is handled through alternative mechanisms.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-can-i-enable-check-rate-on-some-gateways-and-disable-on-others\">\u2753 Can I enable Check rate on some gateways and disable on others?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd27 Yes, the VOS3000 check rate before routing is a per-gateway setting. Each routing gateway has its own independent Check rate configuration. This allows you to enable the VOS3000 check rate before routing on production gateways while disabling it on emergency or test gateways. You can also use different Check rate settings across gateways serving different traffic types, ensuring that revenue-sensitive gateways always verify rates while service-critical gateways prioritize call completion over billing verification.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-how-does-check-rate-interact-with-sort-by-lowest-rate-per-second\">\u2753 How does Check rate interact with Sort by lowest rate per second?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcca The VOS3000 check rate before routing is evaluated before the sort algorithm runs. If Check rate is enabled and no clearing fee rate exists, the gateway is excluded from the routing pool entirely \u2014 it never reaches the sorting stage. If Check rate passes (a rate exists), the gateway is included in the sort, and the &#8220;Sort by lowest rate per second&#8221; feature can then use that rate for cost-based ordering. The VOS3000 check rate before routing ensures that only gateways with valid rates participate in rate-based sorting. For more on sorting, see our <a href=\"https:\/\/multahost.com\/blog\/vos3000-lcr-least-cost-routing\/\" target=\"_blank\" rel=\"noopener\">LCR routing<\/a> guide.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\" id=\"\u2753-should-i-enable-check-rate-on-emergency-service-gateways\">\u2753 Should I enable Check rate on emergency service gateways?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcde No, the VOS3000 check rate before routing should generally be disabled on gateways that handle emergency or toll-free calls. These calls must complete regardless of billing rate availability \u2014 a 911 call cannot be rejected because the rate table is missing an entry. Disable the VOS3000 check rate before routing on any gateway where call completion takes priority over billing verification, and handle billing for these calls through alternative mechanisms. Need help designing your rate verification strategy? Contact us on <a href=\"https:\/\/wa.me\/8801911119966\" target=\"_blank\" rel=\"noopener\">WhatsApp at +8801911119966<\/a>. \ud83d\udcf1<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udcde-need-expert-help-with-vos-3000-check-rate-before-routing\">\ud83d\udcde Need Expert Help with VOS3000 Check Rate Before Routing?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd27 The VOS3000 check rate before routing is a fundamental revenue assurance feature that prevents unbilled calls and protects your billing integrity. The VOS3000 check rate before routing ensures every routed call has a valid clearing fee rate, eliminating the silent revenue leakage that occurs when calls route without rates. Whether you are enabling Check rate for the first time, troubleshooting calls blocked by rate verification, or designing a comprehensive revenue assurance strategy, expert guidance ensures your VOS3000 check rate before routing configuration delivers maximum revenue protection. \ud83d\udcb0<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcac <strong>WhatsApp:<\/strong> <a href=\"https:\/\/wa.me\/8801911119966\" target=\"_blank\" rel=\"noopener\">+8801911119966<\/a> \u2014 Get immediate assistance with VOS3000 check rate before routing configuration, VOS3000 check rate before routing troubleshooting, rate table optimization, and revenue assurance strategy. Our team specializes in VOS3000 billing integrity, routing safeguards, and carrier-grade VoIP deployment. \ud83d\udd27<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udd17 Explore related VOS3000 rate and billing configuration guides:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><a href=\"https:\/\/multahost.com\/blog\/vos3000-cdr-analysis-billing\/\" target=\"_blank\" rel=\"noopener\">VOS3000 CDR Analysis and Billing<\/a> \u2014 CDR analysis for revenue verification<\/li>\n\n\n\n<li><a href=\"https:\/\/multahost.com\/blog\/vos3000-profit-margin-complete\/\" target=\"_blank\" rel=\"noopener\">VOS3000 Profit Margin Complete<\/a> \u2014 Margin analysis and optimization<\/li>\n\n\n\n<li><a href=\"https:\/\/multahost.com\/blog\/vos3000-lcr-least-cost-routing\/\" target=\"_blank\" rel=\"noopener\">VOS3000 LCR Least Cost Routing<\/a> \u2014 Cost-based routing configuration<\/li>\n\n\n\n<li><a href=\"https:\/\/multahost.com\/blog\/vos3000-gateway-configuration-routing-mapping\/\" target=\"_blank\" rel=\"noopener\">VOS3000 Gateway Configuration Routing Mapping<\/a> \u2014 Gateway routing and mapping setup<\/li>\n\n\n\n<li><a href=\"https:\/\/multahost.com\/blog\/vos3000-routing-optimization\/\" target=\"_blank\" rel=\"noopener\">VOS3000 Routing Optimization<\/a> \u2014 Quality and cost routing optimization<\/li>\n\n\n\n<li><a href=\"https:\/\/multahost.com\/blog\/vos3000-system-parameters\/\" target=\"_blank\" rel=\"noopener\">VOS3000 System Parameters<\/a> \u2014 Complete system parameter reference<\/li>\n<\/ul>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"\ud83d\udcde-need-call-center-setup-support\">\ud83d\udcde Need Professional VOS3000 Setup Support?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">For professional VOS3000 installations and deployment, VOS3000 Server Rental Solution:<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">\ud83d\udcf1 <strong>WhatsApp:<\/strong> <a href=\"https:\/\/wa.me\/8801911119966\" target=\"_blank\" rel=\"noopener\">+8801911119966<\/a><br>\ud83c\udf10 <strong>Website:<\/strong> <a href=\"https:\/\/www.vos3000.com\">www.vos3000.com<\/a><br>\ud83c\udf10 <strong>Blog:<\/strong> <a href=\"https:\/\/multahost.com\/blog\" target=\"_blank\" rel=\"noopener\">multahost.com\/blog<\/a><br>\ud83d\udce5 <strong>Downloads:<\/strong> <a href=\"https:\/\/www.vos3000.com\/downloads.php\">VOS3000 Downloads<\/a><\/p>\n\n\n\n<hr class=\"wp-block-separator has-alpha-channel-opacity\"\/>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><tbody><tr><td><img decoding=\"async\" src=\"https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-RTP-Lock-In-VOS3000-Aggressive-Gateway-Failover-768x1024.png\" alt=\"VOS3000 Gateway Switch Limit, VOS3000 RTP Lock-In, VOS3000 Aggressive Gateway Failover, VOS3000 Busy Stop Switch, VOS3000 real-time gateway ASR, VOS3000 ASR Cost Routing, VOS3000 Prefix Mode Extension, VOS3000 Period Capacity Configuration, VOS3000 Period Dial Plan, VOS3000 RTP Interrupt Detection, VOS3000 Lowest Profit Rate Limit, VOS3000 Max Minute Rate Cap, VOS3000 Sort Lowest Rate Per Second, VOS3000 Check Rate Before Routing, VOS3000 Sort by Lowest Rate, VOS3000 Bilateral Reconciliation, VOS3000 SIP OPTIONS Online Check, VOS3000 T38 Fax Over IP, VOS3000 G729 Annex B Silence, VOS3000 Gateway Group Reserved Lines, VOS3000 Auxiliary Ring Tone\" style=\"\"><\/td><td><img decoding=\"async\" src=\"https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-RTP-Lock-In-VOS3000-Aggressive-Gateway-Failover-768x1024.png\" alt=\"VOS3000 Gateway Switch Limit, VOS3000 RTP Lock-In, VOS3000 Aggressive Gateway Failover, VOS3000 Busy Stop Switch, VOS3000 real-time gateway ASR, VOS3000 ASR Cost Routing, VOS3000 Prefix Mode Extension, VOS3000 Period Capacity Configuration, VOS3000 Period Dial Plan, VOS3000 RTP Interrupt Detection, VOS3000 Lowest Profit Rate Limit, VOS3000 Max Minute Rate Cap, VOS3000 Sort Lowest Rate Per Second, VOS3000 Check Rate Before Routing, VOS3000 Sort by Lowest Rate, VOS3000 Bilateral Reconciliation, VOS3000 SIP OPTIONS Online Check, VOS3000 T38 Fax Over IP, VOS3000 G729 Annex B Silence, VOS3000 Gateway Group Reserved Lines, VOS3000 Auxiliary Ring Tone\" style=\"\"><\/td><td><img decoding=\"async\" src=\"https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-RTP-Lock-In-VOS3000-Aggressive-Gateway-Failover-768x1024.png\" alt=\"VOS3000 Gateway Switch Limit, VOS3000 RTP Lock-In, VOS3000 Aggressive Gateway Failover, VOS3000 Busy Stop Switch, VOS3000 real-time gateway ASR, VOS3000 ASR Cost Routing, VOS3000 Prefix Mode Extension, VOS3000 Period Capacity Configuration, VOS3000 Period Dial Plan, VOS3000 RTP Interrupt Detection, VOS3000 Lowest Profit Rate Limit, VOS3000 Max Minute Rate Cap, VOS3000 Sort Lowest Rate Per Second, VOS3000 Check Rate Before Routing, VOS3000 Sort by Lowest Rate, VOS3000 Bilateral Reconciliation, VOS3000 SIP OPTIONS Online Check, VOS3000 T38 Fax Over IP, VOS3000 G729 Annex B Silence, VOS3000 Gateway Group Reserved Lines, VOS3000 Auxiliary Ring Tone\" style=\"\"><\/td><\/tr><\/tbody><\/table><\/figure>\n","protected":false},"excerpt":{"rendered":"<p>Master VOS3000 check rate before routing to verify billing rate existence. Prevent unbilled calls and revenue leakage by ensuring a clearing fee rate exists before routing through any gateway.<\/p>\n","protected":false},"author":1,"featured_media":1424,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_kadence_starter_templates_imported_post":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_post_was_ever_published":false},"categories":[1],"tags":[8853,8847,8855,8846,8856,8878,8879,8843,8881,8859,8870,8873,8849,8842,8871,8850,8862,8858,7134,8869,8817,8845,8880,8867,8864,8848,8861,8877,8860,8841,8852,8865,8844,8851,6673,8876,6589,8857,8854,8866,8863,8868,8874,8875,8872],"class_list":["post-1438","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-vos3000-softswitch","tag-check-rate-vos3000","tag-gateway-check-rate-vos3000","tag-gateway-rate-check-setup","tag-gateway-rate-existence-vos3000","tag-gateway-rate-verification-vos3000","tag-vos3000-billing-rate-safeguard","tag-vos3000-billing-rate-verification","tag-vos3000-call-rate-check","tag-vos3000-call-routing-rate","tag-vos3000-cdr-rate-check","tag-vos3000-check-rate","tag-vos3000-check-rate-before-routing","tag-vos3000-check-rate-gateway","tag-vos3000-check-rate-setting","tag-vos3000-clearing-fee-rate-check","tag-vos3000-clearing-fee-verification","tag-vos3000-clearing-rate-existence","tag-vos3000-cost-verification-routing","tag-vos3000-gateway-additional-settings","tag-vos3000-gateway-rate-check","tag-vos3000-operation-management-rate","tag-vos3000-rate-before-routing","tag-vos3000-rate-check-best-practice","tag-vos3000-rate-check-configuration","tag-vos3000-rate-check-deployment","tag-vos3000-rate-check-guide","tag-vos3000-rate-check-per-gateway","tag-vos3000-rate-check-production","tag-vos3000-rate-check-routing","tag-vos3000-rate-check-troubleshooting","tag-vos3000-rate-existence-check","tag-vos3000-rate-existence-safeguard","tag-vos3000-rate-verification","tag-vos3000-rate-verification-routing","tag-vos3000-revenue-assurance","tag-vos3000-revenue-leakage-prevention","tag-vos3000-revenue-protection","tag-vos3000-routing-rate-safeguard","tag-vos3000-routing-rate-verification","tag-vos3000-routing-safeguard","tag-vos3000-routing-without-rate","tag-vos3000-softswitch-rate-verification","tag-vos3000-unbilled-call-detection","tag-vos3000-unbilled-call-prevention","tag-vos3000-voip-rate-verification"],"acf":[],"jetpack_featured_media_url":"https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Check-Rate-Before-Routing-VOS3000-Sort-by-Lowest-Rate-VOS3000-Bilateral-Reconciliation-VOS3000-SIP-OPTIONS-Online-Check-VOS3000-T38-Fax-Over-IP.png","blog_post_layout_featured_media_urls":{"thumbnail":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Check-Rate-Before-Routing-VOS3000-Sort-by-Lowest-Rate-VOS3000-Bilateral-Reconciliation-VOS3000-SIP-OPTIONS-Online-Check-VOS3000-T38-Fax-Over-IP-150x150.png",150,150,true],"full":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Check-Rate-Before-Routing-VOS3000-Sort-by-Lowest-Rate-VOS3000-Bilateral-Reconciliation-VOS3000-SIP-OPTIONS-Online-Check-VOS3000-T38-Fax-Over-IP.png",1536,1024,false]},"categories_names":{"1":{"name":"VOS3000 Softswitch","link":"https:\/\/www.vos3000.com\/blog\/category\/vos3000-softswitch\/"}},"tags_names":{"8853":{"name":"check rate VOS3000","link":"https:\/\/www.vos3000.com\/blog\/tag\/check-rate-vos3000\/"},"8847":{"name":"gateway check rate VOS3000","link":"https:\/\/www.vos3000.com\/blog\/tag\/gateway-check-rate-vos3000\/"},"8855":{"name":"gateway rate check setup","link":"https:\/\/www.vos3000.com\/blog\/tag\/gateway-rate-check-setup\/"},"8846":{"name":"gateway rate existence VOS3000","link":"https:\/\/www.vos3000.com\/blog\/tag\/gateway-rate-existence-vos3000\/"},"8856":{"name":"gateway rate verification VOS3000","link":"https:\/\/www.vos3000.com\/blog\/tag\/gateway-rate-verification-vos3000\/"},"8878":{"name":"VOS3000 billing rate safeguard","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-billing-rate-safeguard\/"},"8879":{"name":"VOS3000 billing rate verification","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-billing-rate-verification\/"},"8843":{"name":"VOS3000 call rate check","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-call-rate-check\/"},"8881":{"name":"VOS3000 call routing rate","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-call-routing-rate\/"},"8859":{"name":"VOS3000 CDR rate check","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-cdr-rate-check\/"},"8870":{"name":"VOS3000 check rate","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-check-rate\/"},"8873":{"name":"VOS3000 check rate before routing","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-check-rate-before-routing\/"},"8849":{"name":"VOS3000 check rate gateway","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-check-rate-gateway\/"},"8842":{"name":"VOS3000 check rate setting","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-check-rate-setting\/"},"8871":{"name":"VOS3000 clearing fee rate check","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-clearing-fee-rate-check\/"},"8850":{"name":"VOS3000 clearing fee verification","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-clearing-fee-verification\/"},"8862":{"name":"VOS3000 clearing rate existence","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-clearing-rate-existence\/"},"8858":{"name":"VOS3000 cost verification routing","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-cost-verification-routing\/"},"7134":{"name":"VOS3000 gateway additional settings","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-gateway-additional-settings\/"},"8869":{"name":"VOS3000 gateway rate check","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-gateway-rate-check\/"},"8817":{"name":"VOS3000 operation management rate","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-operation-management-rate\/"},"8845":{"name":"VOS3000 rate before routing","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-before-routing\/"},"8880":{"name":"VOS3000 rate check best practice","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-check-best-practice\/"},"8867":{"name":"VOS3000 rate check configuration","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-check-configuration\/"},"8864":{"name":"VOS3000 rate check deployment","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-check-deployment\/"},"8848":{"name":"VOS3000 rate check guide","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-check-guide\/"},"8861":{"name":"VOS3000 rate check per gateway","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-check-per-gateway\/"},"8877":{"name":"VOS3000 rate check production","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-check-production\/"},"8860":{"name":"VOS3000 rate check routing","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-check-routing\/"},"8841":{"name":"VOS3000 rate check troubleshooting","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-check-troubleshooting\/"},"8852":{"name":"VOS3000 rate existence check","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-existence-check\/"},"8865":{"name":"VOS3000 rate existence safeguard","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-existence-safeguard\/"},"8844":{"name":"VOS3000 rate verification","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-verification\/"},"8851":{"name":"VOS3000 rate verification routing","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-rate-verification-routing\/"},"6673":{"name":"VOS3000 revenue assurance","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-revenue-assurance\/"},"8876":{"name":"VOS3000 revenue leakage prevention","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-revenue-leakage-prevention\/"},"6589":{"name":"VOS3000 revenue protection","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-revenue-protection\/"},"8857":{"name":"VOS3000 routing rate safeguard","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-routing-rate-safeguard\/"},"8854":{"name":"VOS3000 routing rate verification","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-routing-rate-verification\/"},"8866":{"name":"VOS3000 routing safeguard","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-routing-safeguard\/"},"8863":{"name":"VOS3000 routing without rate","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-routing-without-rate\/"},"8868":{"name":"VOS3000 softswitch rate verification","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-softswitch-rate-verification\/"},"8874":{"name":"VOS3000 unbilled call detection","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-unbilled-call-detection\/"},"8875":{"name":"VOS3000 unbilled call prevention","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-unbilled-call-prevention\/"},"8872":{"name":"VOS3000 VoIP rate verification","link":"https:\/\/www.vos3000.com\/blog\/tag\/vos3000-voip-rate-verification\/"}},"comments_number":"0","wpmagazine_modules_lite_featured_media_urls":{"thumbnail":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Check-Rate-Before-Routing-VOS3000-Sort-by-Lowest-Rate-VOS3000-Bilateral-Reconciliation-VOS3000-SIP-OPTIONS-Online-Check-VOS3000-T38-Fax-Over-IP-150x150.png",150,150,true],"cvmm-medium":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Check-Rate-Before-Routing-VOS3000-Sort-by-Lowest-Rate-VOS3000-Bilateral-Reconciliation-VOS3000-SIP-OPTIONS-Online-Check-VOS3000-T38-Fax-Over-IP-300x300.png",300,300,true],"cvmm-medium-plus":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Check-Rate-Before-Routing-VOS3000-Sort-by-Lowest-Rate-VOS3000-Bilateral-Reconciliation-VOS3000-SIP-OPTIONS-Online-Check-VOS3000-T38-Fax-Over-IP-305x207.png",305,207,true],"cvmm-portrait":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Check-Rate-Before-Routing-VOS3000-Sort-by-Lowest-Rate-VOS3000-Bilateral-Reconciliation-VOS3000-SIP-OPTIONS-Online-Check-VOS3000-T38-Fax-Over-IP-400x600.png",400,600,true],"cvmm-medium-square":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Check-Rate-Before-Routing-VOS3000-Sort-by-Lowest-Rate-VOS3000-Bilateral-Reconciliation-VOS3000-SIP-OPTIONS-Online-Check-VOS3000-T38-Fax-Over-IP-600x600.png",600,600,true],"cvmm-large":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Check-Rate-Before-Routing-VOS3000-Sort-by-Lowest-Rate-VOS3000-Bilateral-Reconciliation-VOS3000-SIP-OPTIONS-Online-Check-VOS3000-T38-Fax-Over-IP-1024x1024.png",1024,1024,true],"cvmm-small":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Check-Rate-Before-Routing-VOS3000-Sort-by-Lowest-Rate-VOS3000-Bilateral-Reconciliation-VOS3000-SIP-OPTIONS-Online-Check-VOS3000-T38-Fax-Over-IP-130x95.png",130,95,true],"full":["https:\/\/www.vos3000.com\/blog\/wp-content\/uploads\/2026\/04\/VOS3000-Check-Rate-Before-Routing-VOS3000-Sort-by-Lowest-Rate-VOS3000-Bilateral-Reconciliation-VOS3000-SIP-OPTIONS-Online-Check-VOS3000-T38-Fax-Over-IP.png",1536,1024,false]},"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/posts\/1438","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/comments?post=1438"}],"version-history":[{"count":1,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/posts\/1438\/revisions"}],"predecessor-version":[{"id":1445,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/posts\/1438\/revisions\/1445"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/media\/1424"}],"wp:attachment":[{"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/media?parent=1438"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/categories?post=1438"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.vos3000.com\/blog\/wp-json\/wp\/v2\/tags?post=1438"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}